Ian Webster

Ian Webster

Certifier number:
TST000282
 
Authorisation status:
Active
 
Authorisation expiry:
 
Home region:
Taranaki
 
Working region:
Taranaki
 
Contact address:
PO Box 660
Taranaki Mail Centre
New Plymouth 4340
 
Phone:
06 759 5856
 
Fax:
06 759 1139
 
Mobile:
027 241 3944
 
Email:
iwebster@pandp.co.nz

Authorised to issue certificates for

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 2.1.1
Locations where class 2.1.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 3.1
Locations where class 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 3.1 substances are present in packages, whether stored and/or used, is limited to: storage in AS 1940 cabinets; storage in a type A, B, C or D building to a maximum quantity of 5,000 L; storage in a detached store, where no maximum quantity limit applies; and use up to a maximum aggregate quantity of 450 L.

Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems does not include the repair, alteration and maintenance of an above ground stationary tank in accordance with API 653 or EEMUA 159 or relevant safe work instrument [Regulation 17.82(1), Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]