Aaron Donald

HazSubs Services Limited

NZBN:
9429038294471
 
Certifier number:
TST000301
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Auckland
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
4D Target Court, Glenfield
Auckland 0627
 
Website:
http://www.hazsubs.co.nz
 
Phone:
09 215 6333
 
Mobile:
021 511 291
 
Email:
aaron@hazsubs.co.nz

Authorised to issue certificates for

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
Certified handlers in control of class 1 substances [Regulations 4.1 and 9.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 1) is limited to:
i. Handlers in control of detonation and deflagration of class 1 substances for the following types of work: construction, explosive detection, land operations, oil and gas industry, propellants, pyrotechnics, quarrying, seismic survey/exploration, storage for distribution, surface mining, transport for distribution, underground mining - metalliferous.
ii. Handlers in control of the transfer of class 1 substances from one type of transport to another [Part 9, subpart 5, Health and Safety at Work (Hazardous Substances) Regulations 2017].
iii. Handlers manufacturing commercial explosives containing ammonium nitrate and ammonium nitrate/fuel oil (ANFO).
 
 
Life cycles: disposal, manufacture, storage, transport, use

Class 1 - Magazine Design
Design of magazines securing class 1 substances [Regulations 9.20(1)(b) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017
 
 
Conditions: The certification of container design is limited to certifying the design of permanent (or fixed) magazines and relocatable magazines as defined in AS 2187.1-1998.

Class 1
Construction of readily movable containers securing class 1 substances [Regulations 9.20(2) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of container design is limited to certifying the design of permanent (or fixed) magazines and relocatable magazines as defined in AS 2187.1-1998.

Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]

UNRTDG
UNRTDG cylinder importation [Regulation 15.3(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Pre-Commissioning
Cylinder pre-commissioning [Regulation 15.19, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
Locations where class 1 substances are present [Regulation 9.26, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 1 substances are present does not include underground hazardous substance locations.
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 2.1.1 substances are present is limited to:
i. packages (cylinders) to a maximum aggregate quantity of 30,000 kg or 30,000 cubic meters (permanent gases);
ii. storage in stationary container systems to a maximum quantity of 50,000 L.

The certification of locations where class 3.1 substances are present is limited to:
i. storage in closed packages in one or more AS 1940 cabinets;
ii. closed packages with a maximum aggregate quantity of 2,000 L in a store in a building or a maximum aggregate quantity of 10,000 L in a type D store in a building as per Regulation 11.31, Health and Safety at Work (Hazardous Substances) Regulations 2017;
iii. closed packages with a maximum aggregate quantity of 100,000 L for storage in a detached building;
iv. use up to a maximum aggregate quantity of 2,500 L; and
v. storage in stationary container systems to a maximum quantity of 120,000 L.
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval of locations where class 5.1.2 substances are present is limited to:
i. storage and use of cylinders up to a maximum aggregate quantity of 35,000 kg (non-permanent gases) or 10,000 cubic meters (permanent gases); ii. storage in stationary container systems to a maximum quantity of 50,000 L.
 
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval of locations where class 5.2 substances are present is limited to organic peroxides in packages goods only up to a maximum aggregate quantity of 2,000 kg.

Class 1 Category G
Outdoor pyrotechnic displays of Class 1 Category G substances [Regulation 9.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]