Janet Connochie

Chemsafety Limited

Certifier number:
TST000303
 
Authorisation status:
Active
 
Authorisation expiry:
 
Home region:
Canterbury
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 8141
Christchurch 8440
 
Website:
http://www.chemsafety.co.nz
 
Phone:
03 943 7038
 
Fax:
03 366 3656
 
Mobile:
027 338 4006
 
Email:
janet@chemsafety.co.nz

Authorised to issue certificates for

Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include the use of agrichemicals, veterinary medicines, fumigants and vertebrate toxic agents.
 
 
Life cycles: disposal, manufacture, storage, transport, use

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground and below ground tanks which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 60,000 L (aggregate total) per tank used or intended to be used to contain a class 3.1 hazardous liquid.

The authorisation for stationary container systems does not include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017.

The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017

The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].