Robert Lee

Inferno Consultants Ltd

Certifier number:
TST100109
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Bay of Plenty
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington
 
Contact address:
PO Box 11249
Papamoa
 
Website:
http://www.infernoconsultants.co.nz/
 
Phone:
07 572 2174
 
Fax:
07 575 0540
 
Mobile:
0274 881466
 
Email:
admin@infernoconsultants.co.nz

Authorised to issue certificates for

Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include agrichemicals, veterinary medicines, fumigants and vertebrate toxic agents.

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems that include burners is limited to a maximum tank capacity of 15,000 L.
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems that include installations for burning class 3.1 substances is limited to a maximum tank capacity of 15,000 L.
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 60,000 L per tank used or intended to be used to contain a hazardous liquid; or 12,000 L (water capacity) per tank used or intended to be used to contain a class 2.1.1 substance.
The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 100,000 L per tank used or intended to be used to contain a hazardous liquid.
The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].