Kirsty McAnally

KM Compliance Limited

Certifier number:
TST100143
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Otago
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 5235
Dunedin 9058
 
Phone:
03 477 5996
 
Fax:
03 477 5986
 
Mobile:
021 140 2516
 
Email:
kirsty@kmcompliance.co.nz

Authorised to issue certificates for

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of approved fillers is limited to fillers charging cylinders with class 2.1.1 substances, non-hazardous substances and compressed air, including breathing air.
When charging Self Contained Breathing Apparatus (SCBA), including Self Contained Underwater Breathing Apparatus (SCUBA), the approval for fillers is limited to breathing air as set out in clause 3.13.1 AS/NZS 2299.1:2007.

Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include agrichemicals, veterinary medicines, fumigants and vertebrate toxic agents.

Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 2.1.1
Locations where class 2.1.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 2.1.1 substances are present is limited to LPG in: i. packages (cylinders) to a maximum aggregate quantity of 5,000 kg; ii. above ground bulk storage to a maximum aggregate quantity of 12,000 L.
 
Class 3.1
Locations where class 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 3.1 substances are present is limited to:
i. bulk storage at vehicle and aircraft refuelling facilities up to a maximum aggregate quantity of 220,000 L;
ii. storage in closed packages in one or more AS 1940 cabinets or up to 2,000 L stored externally or in a detached store.
The certification of locations where class 3.1 substances are present excludes class 3.1 substances in use or in open containers.
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 5.1.1 substances are present is limited to storage in stationary tanks up to a maximum capacity of
25,000 L per tank.
The certification of locations where class 5.1.2 substances are present is limited to cylinders in storage and in use up to a maximum aggregate quantity of 5,000 kg (non-permanent gases) or 1,500 cubic meters (permanent gases).
The certification of locations where class 5.1.1 substances are present excludes class 5.1.1 substances in solid form.

Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground and below ground tanks which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 25,000 L per tank used or intended to be used to contain a class 3.1, 5.1.1C, 6 or 8 hazardous liquid ; or 50,000 L per tank used or intended to be used to contain diesel fuel or low flashpoint diesel.
The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 110,000 L per tank used or intended to be used to contain class 3.1 hazardous liquids at vehicle and aircraft refuelling facilities.
The authorisation for stationary container systems does not include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].