Ross Taylor

Haztec 2018 Ltd

Certifier number:
TST100189
 
Authorisation status:
Active
 
Authorisation expiry:
 
Home region:
Auckland
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 199
Silverdale
Auckland North 0944
 
Website:
http://haztec.co.nz
 
Phone:
09 426 5902
 
Fax:
09 426 5903
 
Mobile:
027 5239365
 
Email:
ross@haztec.co.nz

Authorised to issue certificates for

Authorisation continues in force whilst the renewal application is in process

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include agrichemicals, veterinary medicines, fumigants and vertebrate toxic agents.
 
 
Life cycles: disposal, storage, use

Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]

UNRTDG
UNRTDG cylinder importation [Regulation 15.3(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Pre-Commissioning
Cylinder pre-commissioning [Regulation 15.19, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 2.1.1
Locations where class 2.1.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 2.1.1 substances are present is limited to: packages (cylinders) to a maximum aggregate quantity of 5,000 kg or 5,000 cubic meters (permanent gases); above ground bulk storage to a maximum aggregate quantity of 4,000 kg.
 
Class 3.1
Locations where class 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 3.1 substances are present is limited to: storage in closed packages in one or more AS 1940 cabinets to a maximum aggregate quantity of 1,000 L; closed packages with a maximum aggregate quantity of 2,000 L in a store in a building or a maximum aggregate quantity of 10,000 L in a type D store in a building as per regulation 11.31, Health and Safety at Work (Hazardous Substances) Regulations 2017; closed packages with a maximum aggregate quantity of 10,000 L for storage in Type A, B, C and D building; use up to a maximum aggregate quantity of 2,500 L; and bulk storage up to a maximum quantity of 120,000 L.
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 5.2 substances are present is limited to organic peroxides in packaged goods only up to a maximum aggregate quantity of 2,000 kg.
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where 5.1.2 substances are present is limited to cylinders in storage up to a maximum of 5,000 kg (non-permanent gases) or 5,000 cubic meters (permanent gases).

Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems that include burners is limited to a maximum tank capacity of 5,000 L.
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground and below ground tanks which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 50,000 L per tank used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 50,000 L per tank used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].