Rex Alexander

Envirocom (NZ) Limited

Certifier number:
TST000009
 
Contact address:
PO Box 5235
Dunedin 9058
 
Website:
http://www.envirocom.co.nz/
 
Phone:
03 477 5966
 
Fax:
03 477 5986
 
Mobile:
021 0460 554
 
Email:
rex.alexander@envirocom.co.nz

Cancelled authorisations

 
Grounds for cancellation:
Authorisation as a compliance certifier is cancelled with effect from 28 May 2018 under regulation 6.20(1) of the Health and Safety at Work (Hazardous Substances) Regulations 2017 on the grounds that the certifier has failed to perform the functions of a compliance certifier in an objective manner that promotes safety.
 
Cancelled from:

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of approved fillers does not include fillers of acetylene cylinders.

Agrichemicals
Certified handlers in control of Agrichemicals [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: Agrichemicals means agricultural compounds, detergents and sanitizers used in an agricultural context as these terms are defined in the latest version of the NZS 8409.

The certification of handlers (agrichemicals) does not include fumigants, veterinary medicines and vertebrate toxic agents.
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include fumigants, veterinary medicines and vertebrate toxic agents.
 
 
Life cycles: disposal, manufacture, storage, transport, use

Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval of locations where class 2.1.1, 2.1.2 and 3.1 substances are present is limited to (other than vehicle and aircraft refuelling facilities that have no limitation): a maximum aggregate quantity of 25,000 kg for class 2.1.1 substances; a maximum aggregate quantity of 25,000 L for class 3.1A substances; a maximum aggregate quantity of 100,000 L for class 3.1B and 3.1C substances.

On 5 April 2016, following an investigation under section 86 of the Hazardous Substances and New Organisms Act 1996, Mr Alexanders approval as a test certifier to issue location test certificates was amended to be subject to the above condition.
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]

LPG Fittings
LPG fittings importation and manufacture [Regulation 15.37, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 250,000 L per tank used or intended to be used to contain a class 3, 5, 6 or 8 hazardous liquid.

On 5 April 2016, following an investigation under section 86 of the Hazardous Substances and New Organisms Act 1996, Mr Alexanders approval as a test certifier to issue stationary container system test certificates was amended by limiting the approval to a maximum capacity of 250,000 L per tank as specified above.
 
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems includes the repair, alteration and maintenance of an above ground stationary tank in accordance with API 653 or EEMUA 159 or relevant safe work instrument [Regulation 17.82(1), Health and Safety at Work (Hazardous Substances) Regulations 2017].

 
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Tank Wagon Pre-commissioning
Pre-commissioning of tank wagons [Regulation 16.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]

In Service
Tank wagons meet in-service requirements [Regulation 16.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]