Peter Roche

HazKnow Limited

Certifier number:
TST000002
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Wellington
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 40395
Upper Hutt 5140
 
Mobile:
021 470 278
 
Email:
hazknow@gmail.com

Authorised to issue certificates for

Class 1
Certified handlers in control of class 1 substances [Regulations 4.1 and 9.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 1) is limited to:
i. Handlers in control of detonation and deflagration of class 1 substances.

ii. Handlers in control of the transfer of class 1 substances from one type of transport to another [Part 9, subpart 5, Health and Safety at Work (Hazardous Substances) Regulations 2017].

 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Agrichemicals
Certified handlers in control of Agrichemicals [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (agrichemicals) is limited to the storage of these substances.
 
 
Life cycles: storage
 
Fumigants
Certified handlers in control of Fumigants [Regulations 4.1 and 14.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (fumigants) is limited to the storage of methyl bromide.
 
 
Life cycles: storage
 
Vertebrate Toxic Agents
Certified handlers in control of Vertebrate Toxic Agents [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (vertebrate toxic agents) is limited to the storage of alpha-chloralose, 3-chloro-p-toluidine hydrochloride (DRC 1339), potassium cyanide, sodium cyanide, yellow phosphorus, sodium fluoroacetate (1080), para-aminopropiophenone (PAPP) and microencapsulated zinc phosphide (MZP).
 
 
Life cycles: storage

Class 1 - Magazine Design
Design of magazines securing class 1 substances [Regulations 9.20(1)(b) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017

Class 1
Construction of readily movable containers securing class 1 substances [Regulations 9.20(2) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
Locations where class 1 substances are present [Regulation 9.26, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval is limited to where packaged hazardous substances are stored. Packaged hazardous substances include intermediate bulk containers that comply with chapter 6.5 of the UN Model Regulations.
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval is limited to where packaged hazardous substances are stored. Packaged hazardous substances include intermediate bulk containers that comply with chapter 6.5 of the UN Model Regulations.
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval is limited to where packaged hazardous substances are stored. Packaged hazardous substances include intermediate bulk containers that comply with chapter 6.5 of the UN Model Regulations.
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval is limited to where packaged hazardous substances are stored. Packaged hazardous substances include intermediate bulk containers that comply with chapter 6.5 of the UN Model Regulations.
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval is limited to where packaged hazardous substances are stored. Packaged hazardous substances include intermediate bulk containers that comply with chapter 6.5 of the UN Model Regulations.

Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to
above ground and below ground tanks a) installed prior to 1 July 2006 (existing) and; b) installed subsequent to 1 July 2006 which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems is limited to above ground tanks with a maximum capacity of 60,000 L per tank used or intended to be used to contain a class 3.1 hazardous liquid.

The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 60,000 L per tank used or intended to be used to contain a class 3.1 hazardous liquid.

The authorisation for stationary container systems includes new self-contained above ground tanks on a farm, isolated place or bulk fuel storage and distribution site storing diesel only up to a maximum capacity of 40,000 L.

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

 
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]