;

QEC Limited

Harrison Cashmore

NZBN:
9429051106348
 
Certifier number:
TST100258
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Waikato
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 14
Te Awamutu 3800
 
Website:
https://www.qec.co.nz
 
Phone:
07 8270075
 
Email:
info@qec.co.nz

QEC Limited has been authorised as a compliance certifier under regulation 6.8(3) of the Health and Safety a Work (Hazardous Substances) Regulations 2017. The following people are an individual employed or engaged by QEC Limited to perform the functions of a compliance certifier:

  • Leigh-Anne Peake
  • Jessica-Luisa Brueck
Leigh-Anne Peake and Jessica-Luisa Brueck must perform the functions of a compliance certifier within their scope issued by WorkSafe on 8 August 2023.

Authorised to issue certificates for

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Agrichemicals
Certified handlers in control of Agrichemicals [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Vertebrate Toxic Agents
Certified handlers in control of Vertebrate Toxic Agents [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (vertebrate toxic agents) is limited to personal control of the following substances:
• 3-chloro-p-toluidine hydrochloride (DRC 1339)
• alpha-chloralose
• microencapsulated zinc phosphide
• para-aminopropiophenone (PAPP)
• potassium cyanide
• sodium cyanide
• sodium fluoroacetate (1080)
• yellow phosphorus
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include fumigants.
 
 
Life cycles: disposal, manufacture, storage, transport, use

Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]

UNRTDG
UNRTDG cylinder importation [Regulation 15.3(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 1,000,000 L per tank used or intended to be used to contain a hazardous substance.
The authorisation for stationary container systems including below ground tanks used or intended to be used to contain a hazardous substance is unlimited.
 
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Design
The design of stationary tanks or process containers [Regulation 17.93(1)(a), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for the design of stationary tanks or process containers is limited to certification by QEC Limited for tanks up to a maximum capacity of 60,000 L per tank used or intended to be used to contain a hazardous substance.

Fabricators
The fabricator of stationary tanks or process containers [Regulation 17.93(1)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Conditions that apply for this authorisation

The following conditions apply to QEC Limited and, where appropriate, every person employed or engaged by QEC Limited to perform the functions of a compliance certifier:
  • QEC Limited, and each individual employed or engaged by QEC Limited to perform the functions of a compliance certifier, must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • QEC Limited may only employ or engage Mrs Leigh-Anne Peake and Miss Jessica-Luisa Brueck to perform the functions of a compliance certifier.
  • QEC Limited, each officer of QEC Limited and any persons employed or engaged to perform the functions of a compliance certifier must remain fit and proper throughout the term of the authorisation.
  • QEC Limited must maintain accreditation to AS/NZS ISO/IEC 17020 for the scope of accreditation specified in the Schedule to Certificate of Accreditation issued by International Accreditation New Zealand (IANZ), issue 1, dated 15 August 2023.
  • Mrs Leigh-Anne Peake, named as a signatory in the Schedule to Certificate of Accreditation issued by IANZ, issue 1, dated 15 August 2023, must maintain that signatory status for her specific scope of accreditation specified in that Schedule.
  • Miss Jessica-Luisa Brueck, named as a signatory in the Schedule to Certificate of Accreditation issued by IANZ, issue 1, dated 15 August 2023, must maintain that signatory status for her specific scope of accreditation specified in that Schedule.
  • QEC Limited must advise WorkSafe of any change to the scope of accreditation issued by IANZ, issue 1, dated 15 August 2023.