;

Neil Dobbs

Work Injury Care Limited

NZBN:
9429037559755
 
Certifier number:
TST000102
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Northland
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington
 
Contact address:
2487 McKenzie Bay
Whangarei Heads Road
Whangarei 0174
 
Phone:
09 434 0168
 
Fax:
09 434 0168
 
Mobile:
021 557 756
 
Email:
wic@xtra.co.nz

Authorised to issue certificates for

Agrichemicals
Certified handlers in control of Agrichemicals [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: Agrichemicals means agricultural compounds, veterinary medicines, detergents and sanitisers used in an agricultural context as these terms are defined in the latest version of the NZS 8409.
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Fumigants
Certified handlers in control of Fumigants [Regulations 4.1 and 14.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (fumigants) is limited to:
- aluminium phosphide
- chloropicrin
- dichloropropene
- dichloropropene & chloropicrin
- hydrocyanic acid
- magnesium phosphide
- methyl bromide
- phosphine
- ethanedinitrile (EDN)

The certification of handlers of ethanedinitrile (EDN) is for the life cycles use, storage, transport and disposal
The certification of handlers for all other fumigants listed above is for the life cycles manufacture, use, storage, transport and disposal
 
 
Life cycles: disposal, manufacture, storage, transport, use
 
Vertebrate Toxic Agents
Certified handlers in control of Vertebrate Toxic Agents [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (vertebrate toxic agents) is limited to the following substances:
- 3-chloro-p-toluidine hydrochloride (DRC 1339)
- alpha-chloralose
- microencapsulated zinc phosphide (MZP)
- para-aminopropriophenone (PAPP)
- potassium cyanide
- sodium cyanide
- sodium fluoroacetate (1080)
- yellow phosphorous
 
 
Life cycles: disposal, manufacture, storage, transport, use

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground and below ground tanks a) installed prior to 1 July 2006 (existing) and; b) installed subsequent to 1 July 2006 which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems is limited to above and below ground tanks up to maximum capacity of 110,000 L (aggregate total) per tank used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Conditions that apply for this authorisation

  • You must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • You must remain a fit and proper person throughout the period of your authorisation.