Aaron Ian William Donald

Total Compliance Group Limited

NZBN:
9429049003673
 
Certifier number:
TST000301
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Auckland
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
84 Deep Creek Road
Waiake
Auckland 0630
 
Website:
https://www.totalcompliance.co.nz
 
Mobile:
021 314 297
 
Email:
aaron@tcomp.co.nz

Authorised to issue certificates for

Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
The level of blast overpressure and fire hazard or minor projection hazard for detonation or deflagration of class 1 substances [Regulation 9.30(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
Certified handlers in control of class 1 substances [Regulations 4.1 and 9.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 1) is limited to: i. Handlers in control of detonation and deflagration of class 1 substances for the following types of work: commercial transport, construction work, explosives detection work, land operations, oil and gas industry work, pyrotechnical work, quarrying, seismic surveys andexploration, storage for distribution, surface mining, underground mining - metalliferous, work with propellants. ii. Handlers in control of the transfer of class 1 substances from one type of transport to another [Part 9, subpart 5, Health and Safety at Work (Hazardous Substances) Regulations 2017]. iii. Handlers manufacturing commercial explosives containing ammonium nitrate and ammonium nitrate/fuel oil (ANFO).
 
 
Life cycles: disposal, manufacture, storage, transport, use

Class 1 - Magazine Design
Design of magazines securing class 1 substances [Regulations 9.20(1)(b) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017
 
 
Conditions: The certification of container design is limited to certifying the design of permanent (or fixed) magazines and relocatable magazines as defined in AS 2187.1-1998.

Class 1
Construction of readily movable containers securing class 1 substances [Regulations 9.20(2) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]

UNRTDG
UNRTDG cylinder importation [Regulation 15.3(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Pre-Commissioning
Cylinder pre-commissioning [Regulation 15.19, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1
Locations where class 1 substances are present [Regulation 9.26, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 1 substances are present does not include underground hazardous substance locations.
 
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval of locations where class 5.1.2 substances are present is limited to: i. storage and use of cylinders up to a maximum aggregate quantity of 35,000 kg (non-permanent gases) or 10,000 cubic meters (permanent gases); ii. storage in stationary container systems to a maximum quantity of 200,000 L.
 
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The approval of locations where class 5.2 substances are present is limited to organic peroxides in packages goods only up to a maximum aggregate quantity of 2,000 kg.

LPG Fittings
LPG fittings importation and manufacture [Regulation 15.37, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 1 Category G
Outdoor pyrotechnic displays of Class 1 Category G substances [Regulation 9.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 3,500,000 L per tank used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 120,000 L per tank used or intended to be used to contain a hazardous liquid.

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include certification of a design as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include certification of a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for the repair, alteration and maintenance of stationary container systems is limited to above ground tanks storing hazardous liquids up to a maximum capacity of 3,500,000 L per tank used or intended to be used to contain a hazardous liquid.
 
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Conditions that apply for this authorisation

  • Mr Donald must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • Mr Donald must remain a fit and proper person throughout the period of this authorisation.