Geoffrey Neil Meikle

Technical Compliance Consultants (NZ) Limited

NZBN:
9429033597423
 
Certifier number:
TST100123
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Auckland
 
Working region:
Auckland, Bay of Plenty, Northland, Waikato
 
Contact address:
PO Box 35366
Browns Bay
Auckland 0753
 
Website:
http://www.techcomp.co.nz
 
Phone:
+64 9 475 5240
 
Fax:
+64 9 475 5529
 
Mobile:
021 113 4326
 
Email:
g.meikle@techcomp.co.nz

Authorised to issue certificates for

Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of handlers (class 6) does not include agrichemicals, fumigants and vertebrate toxic agents.
 
 
Life cycles: disposal, manufacture, storage, use

Class 3.1
Locations where class 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 3.1 substances are present is authorised for:

i. storage in closed packages in one or more cabinets;
ii. storage of packages in a separate building or external storage area to a maximum aggregate quantity of 10,000 L;
iii. bulk storage at vehicle refuelling facilities up to a maximum aggregate quantity of 80,000 L;
iv. use up to a maximum aggregate quantity of 450 L; and
v. paint mixing rooms that are compliant with AS/NZS4114.
 
Class 2.1.1
Locations where class 2.1.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 2.1.1 substances are present is limited to packages (cylinders) to a maximum aggregate quantity of 1,000 kg (liquefied gases) or 1,000 cubic meters (permanent gases).
 
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 5.1.1 substances are present is limited to bulk storage or use up to a maximum aggregate capacity of 2,000 L or 2,000 kg.

The certification of locations where class 5.1.2 substances are present is limited to cylinders in storage and in use up to a maximum aggregate quantity of 2,000 kg (non-permanent gases) or 500 cubic meters (permanent gases).

Conditions that apply for this authorisation

  • You must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • You must remain a fit and proper person throughout the period of your authorisation.