Nathan Anthony Cotter
GLOBAL SEISMIC SOLUTIONS LIMITED
NZBN:
9429034169339
Certifier number:
TST100132
Authorisation status:
Active
Authorisation start:
Authorisation expiry:
Home region:
Bay of Plenty
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
Contact address:
PO Box 67119
Auckland 1349
Auckland 1349
Website:
http://www.globalseismics.com
Mobile:
+64 (21) 792 485
Email:
ncotter@globalseismics.com
Authorised to issue certificates for
Class 1
Certified handlers in control of class 1 substances [Regulations 4.1 and 9.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (class 1) is limited to:
i. Handlers in control of detonation and deflagration of class 1 substances at a workplace at which the following type of work is carried out: commercial transport, construction work, electrical supply and transmission work, explosive detection work, land operations, mechanical and engineering processes, oil and gas industry work, quarrying, research, seismic surveys and exploration, storage for distribution, surface mining, tunnelling, underground mining - metalliferous, underwater work, work with propellants.
ii. Handlers in control of the transfer of class 1 substances from one type of transport to another [Part 9, subpart 5, Health and Safety at Work (Hazardous Substances) Regulations 2017].
iii. Handlers manufacturing commercial explosives containing ammonium nitrate and ammonium nitrate/fuel oil (ANFO).
i. Handlers in control of detonation and deflagration of class 1 substances at a workplace at which the following type of work is carried out: commercial transport, construction work, electrical supply and transmission work, explosive detection work, land operations, mechanical and engineering processes, oil and gas industry work, quarrying, research, seismic surveys and exploration, storage for distribution, surface mining, tunnelling, underground mining - metalliferous, underwater work, work with propellants.
ii. Handlers in control of the transfer of class 1 substances from one type of transport to another [Part 9, subpart 5, Health and Safety at Work (Hazardous Substances) Regulations 2017].
iii. Handlers manufacturing commercial explosives containing ammonium nitrate and ammonium nitrate/fuel oil (ANFO).
Life cycles: disposal, manufacture, storage, transport, use
Class 1 - Magazine Design
Design of magazines securing class 1 substances [Regulations 9.20(1)(b) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017
Class 1
Construction of readily movable containers securing class 1 substances [Regulations 9.20(2) and 9.20(4)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Class 1
Procedures for detonation and deflagration of class 1 substances in darkness [Regulation 9.28(5), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Class 1
Locations where class 1 substances are present [Regulation 9.26, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions that apply for this authorisation
- You must perform the functions of a compliance certifier in an objective manner that promotes safety.
- You must remain a fit and proper person throughout the period of your authorisation.