Orlando Rodriguez

3RDPI Limited

NZBN:
9429042497813
 
Certifier number:
TST100236
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Canterbury
 
Working region:
Auckland, Bay of Plenty, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
2 Chapmans Road
Hillsborough
Christchurch 8022
 
Phone:
03 386 0097
 
Mobile:
0272102201
 
Email:
orlando@3pi.co.nz

Authorised to issue certificates for

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks only used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation for stationary container systems does not include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017.

The authorisation for stationary container systems does not include certification of a design as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation of stationary container systems does not include certification of a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems includes the repair, alteration and maintenance of an above ground stationary tank in accordance with API 653 or EEMUA 159 or relevant safe work instrument [Regulation 17.82(1), Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]

Conditions that apply for this authorisation

  • You must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • You must remain a fit and proper person throughout the period of your authorisation.