Register of Compliance Certifiers
Tony Neilson
EnviroHaz Limited
Certifier number:
TST000043
Authorisation status:
Active
Authorisation expiry:
Home region:
Manawatu-Wanganui
Working region:
Bay of Plenty, Gisborne, Hawke's Bay, Manawatu-Wanganui, Taranaki, Waikato, Wellington
Contact address:
P O Box 4149
Wanganui 4541
Wanganui 4541
Website:
http://www.envirohaz.co.nz
Phone:
06 345 6999
Fax:
06 345 6998
Mobile:
027 443 6938
Email:
tony@envirohaz.co.nz
Authorised to issue certificates for
Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of approved fillers is limited to fillers charging cylinders with class 2.1.1A substances, nitrogen, carbon dioxide and breathing air.
The certification of approved fillers does not include fillers charging acetylene cylinders.
When charging Self Contained Breathing Apparatus (SCBA), including Self Contained Underwater Breathing Apparatus (SCUBA), the approval for fillers is limited to breathing air as set out in clause 3.13.1 AS/NZS 2299.1:2007
The certification of approved fillers does not include fillers charging acetylene cylinders.
When charging Self Contained Breathing Apparatus (SCBA), including Self Contained Underwater Breathing Apparatus (SCUBA), the approval for fillers is limited to breathing air as set out in clause 3.13.1 AS/NZS 2299.1:2007
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (class 6) does not include agrichemicals or veterinary medicines .
Life cycles: disposal, manufacture, storage, transport, use
Fumigants
Certified handlers in control of Fumigants [Regulations 4.1 and 14.3, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (fumigants) is limited to magnesium phosphide (magtoxin).
Life cycles: manufacture, storage
Vertebrate Toxic Agents
Certified handlers in control of Vertebrate Toxic Agents [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (vertebrate toxic agents) is limited to alpha-chloralose, 3-chloro-p-toluidine hydrochloride (DRC 1339), potassium cyanide, sodium cyanide, yellow phosphorus and sodium fluoroacetate (1080).
Life cycles: manufacture, storage
Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
LPG Fittings
LPG fittings importation and manufacture [Regulation 15.37, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 50,000,000 L per tank used or intended to be used to contain a hazardous liquid; or 150,000 L (water capacity) per tank used or intended to be used to contain a class 2.1.1 substance.
The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 110,000 L (aggregate total) per tank used or intended to be used to contain a hazardous liquid.
The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 110,000 L (aggregate total) per tank used or intended to be used to contain a hazardous liquid.
The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The authorisation for stationary container systems includes the repair, alteration and maintenance of an above ground stationary tank in accordance with API 653 or EEMUA 159 or relevant safe work instrument [Regulation 17.82(1), Health and Safety at Work (Hazardous Substances) Regulations 2017].
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Tank Wagon Pre-commissioning
Pre-commissioning of tank wagons [Regulation 16.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
In Service
Tank wagons meet in-service requirements [Regulation 16.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]