;

Kelvin Sparks

Health and Safety at Work NZ Limited

NZBN:
9429042050292
 
Certifier number:
TST100252
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Canterbury
 
Working region:
Auckland, Bay of Plenty, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 37392
Halswell
Christchurch 8025
 
Website:
https://www.hswnz.co.nz
 
Phone:
027 948 7785
 
Mobile:
027 948 7785
 
Email:
kelvin@hswnz.co.nz

Authorised to issue certificates for

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Class 2.1.1
Locations where class 2.1.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 2.1.1 substances are present is authorised for:
i. packages (cylinders) to a maximum aggregate quantity of 5,000 kg (liquefied gases) or 5,000 cubic meters (permanent gases);
ii. storage in stationary container systems to a maximum quantity of 6,000 L.
 
Class 3.1
Locations where class 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The certification of locations where class 3.1 substances are present is authorised for:
i. storage in closed packages in one or more cabinets;
ii. storage in packages in a separate building or external storage area to a maximum aggregate quantity of 5,000 L;
iii. storage in closed packages with a maximum aggregate quantity of 2,000 L in a store in a building;
iv. bulk storage at vehicle refuelling facilities up to a maximum aggregate quantity of 120,000 L;
v. use up to a maximum aggregate quantity of 2,000 L; and
vi. paint mixing rooms that are compliant with AS/NZS4114.

Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems that include burners is limited to the quantities set out in the conditions for stationary container systems – installation.
 
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems that include installations for burning class 3.1 substances is limited to the quantities set out in the conditions for stationary container systems – installation.
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 60,000 L per tank used or intended to be used to contain a class 3.1 hazardous liquid.
The authorisation for stationary container systems is limited to below ground tanks with a maximum capacity of 60,000 L per tank used or intended to be used to contain a class 3.1 hazardous liquid.

The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include the repair and alterations of above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation for stationary container systems does not include a design that is to be certified as per regulation 17.93(1)(a) [Health and Safety at Work (Hazardous Substances) Regulations 2017].
The authorisation of stationary container systems does not include a fabricator for the purpose of constructing a stationary tank or process container in accordance with a design as per regulation 17.93(1)(b) [Health and Safety at Work (Hazardous Substances) Regulations 2017].

Conditions that apply for this authorisation

  • Mr Sparks must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • Mr Sparks must remain a fit and proper person throughout the period of this authorisation.