;

Mathew Isaac Hadler

Sentinel Inspection Services Limited

NZBN:
9429041035443
 
Certifier number:
TST100215
 
Authorisation status:
Active
 
Authorisation start:
 
Authorisation expiry:
 
Home region:
Northland
 
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
 
Contact address:
PO Box 9033
New Plymouth 4351
 
Website:
https://www.sentinelltd.co.nz
 
Phone:
06 281 1302
 
Mobile:
022 461 2266
 
Email:
mathew.hadler@sentinelltd.co.nz

Authorised to issue certificates for

Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for stationary container systems is limited to above ground tanks a) installed prior to 1 July 2006 (existing) and; b) installed subsequent to 1 July 2006 which have previously been certified [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017] up to maximum capacity of 2,000,000 L per tank used or intended to be used to contain a hazardous liquid.

The authorisation for stationary container systems includes new above ground tanks storing hazardous liquids up to a maximum capacity of 250,000 L.

The authorisation for stationary container systems does not include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017].

The authorisation does not include stationary container systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017].
 
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for the repair, alteration and maintenance of stationary container systems is limited to existing above ground tanks storing hazardous liquids up to a maximum capacity of 2,000,000 L per tank used or intended to be used to contain a hazardous liquid.

Design
The design of stationary tanks or process containers [Regulation 17.93(1)(a), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for the design of stationary container systems is limited to above ground tanks up to maximum capacity of 100,000 L per tank used or intended to be used to contain a hazardous liquid.

Fabricators
The fabricator of stationary tanks or process containers [Regulation 17.93(1)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
 
 
Conditions: The authorisation for the fabrication of stationary container systems is limited to above ground tanks up to maximum capacity of 100,000 L per tank used or intended to be used to contain a hazardous liquid.

Tank Wagon Pre-commissioning
Pre-commissioning of tank wagons [Regulation 16.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]

In Service
Tank wagons meet in-service requirements [Regulation 16.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]

Conditions that apply for this authorisation

  • You must perform the functions of a compliance certifier in an objective manner that promotes safety.
  • You must remain a fit and proper person throughout the period of your authorisation.