Leigh-Anne Peake
LP 2023 Limited
Certifier number:
TST000036
Authorisation status:
Active
Authorisation start:
Authorisation expiry:
Home region:
Otago
Working region:
Auckland, Bay of Plenty, Canterbury, Gisborne, Hawke's Bay, Manawatu-Wanganui, Marlborough, Nelson, Northland, Otago, Southland, Taranaki, Tasman, Waikato, Wellington, West Coast
Contact address:
119A Swann Road
Cromwell 9384
Cromwell 9384
Phone:
+6421803918
Mobile:
021 803 918
Email:
leigh-anne@rosecreekfarm.nz
Authorised to issue certificates for
Approved Filler (Gas Cylinders)
Approved fillers of gas cylinders [Regulation 15.66, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Agrichemicals
Certified handlers in control of Agrichemicals [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Life cycles: disposal, manufacture, storage, transport, use
Class 6
Certified handlers in control of class 6 substances [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (class 6) does not include fumigants.
Life cycles: disposal, manufacture, storage, transport, use
Vertebrate Toxic Agents
Certified handlers in control of Vertebrate Toxic Agents [Regulations 4.1 and 13.9, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The certification of handlers (vertebrate toxic agents) is limited to personal control of the following substances: 3-chloro-p-toluidine hydrochloride (DRC 1339); alpha-chloralose; microencapsulated zinc phosphide; para-aminopropiophenone (PAPP); potassium cyanide; sodium cyanide; sodium fluoroacetate (1080); yellow phosphorus.
Life cycles: disposal, manufacture, storage, transport, use
Importation
Cylinder importation [Regulation 15.16, Health and Safety at Work (Hazardous Substances) Regulations 2017]
UNRTDG
UNRTDG cylinder importation [Regulation 15.3(3), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Compliance Plan
Existing Stationary Container Systems for which a compliance plan is in effect [Regulation 17.91 and Schedule 1 Clause 45, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Class 5.2
Locations where class 5.2 substances are present [Regulation 12.42, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 2.1.1, 2.1.2 or 3.1
Locations where classes 2.1.1, 2.1.2 or 3.1 substances are present [Regulation 10.34, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 5.1.1 or 5.1.2
Locations where classes 5.1.1 or 5.1.2 substances are present [Regulation 12.17, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 6 or 8
Locations where classes 6 or 8 substances are present [Regulation 13.38, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Classes 3.2 or 4
Locations where classes 3.2 or 4 substances are present [Regulation 10.36, Health and Safety at Work (Hazardous Substances) Regulations 2017]
Burners
Stationary Container Systems that include burners [Regulation 17.91(2)(g) and (h), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Burning of Class 3.1 substances
Stationary Container Systems that include installations for burning class 3.1 substances [Regulation 17.91(2)(g), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Dispensers
Stationary container systems that include dispensers [Regulation 17.91(2)(m), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Installation
The installation of Stationary Container Systems [Regulation 17.91(2)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The authorisation for stationary container systems is limited to above ground tanks up to maximum capacity of 1,000,000 L per tank used or intended to be used to contain a hazardous substance.
The authorisation for stationary container systems including below ground tanks used or intended to be used to contain a hazardous substance is unlimited.
The authorisation for stationary container systems including below ground tanks used or intended to be used to contain a hazardous substance is unlimited.
Repair, Alteration and Maintenance
The repair, alteration and maintenance of Stationary Container Systems including above ground or below ground tanks [Regulation 17.91(2)(l), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Transfer Point pipework
Stationary Container Systems that include transfer line between ship and stationary tank [Regulation 17.91(2)(i)(iii), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Vapourisers
Stationary Container Systems that include vapourisers [Regulation 17.91(2)(f), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Design
The design of stationary tanks or process containers [Regulation 17.93(1)(a), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions: The authorisation for the design of stationary tanks or process containers is limited to certification for tanks up to a maximum capacity of 60,000 L per tank used or intended to be used to contain a hazardous substance.
Fabricators
The fabricator of stationary tanks or process containers [Regulation 17.93(1)(b), Health and Safety at Work (Hazardous Substances) Regulations 2017]
Conditions that apply for this authorisation
- Mrs Peake must perform the functions of a compliance certifier in an objective manner that promotes safety.
- Mrs Peake must remain a fit and proper person throughout the period of your authorisation.